Citations | Dr. Masood Fakouri Hasanabadi

Total citations: 112
Non‐self‐citations: 63
h-index: 7
g-index: 10
i10-index: 5

Publications:

S. Pourali, M. Fakouri, and M. Kashefi, “Investigation of precipitation hardening of LM22 by nondestructive methods,” in: Iran International Aluminum Conference (IIAC2012), Arak, Iran, 2012.
Citations: 0
Cited by:

M. Fakouri Hasanabadi, A. Nemati, A.H. Kokabi, Effect of intermediate nickel layer on seal strength and chemical compatibility of glass and ferritic stainless steel in oxidizing environment for solid oxide fuel cells, Int. J. Hydrogen Energy. 40 (2015) 16434–16442. doi:10.1016/j.ijhydene.2015.10.023.
Citations: 18
Cited by: [1][2][3][4][5][6][7][8][9][10][11][12][13][14][15][16][17][18]

M. Fakouri Hasanabadi, A.H. Kokabi, A. Nemati, S. Zinatlou Ajabshir, Interactions near the triple-phase boundaries metal/glass/air in planar solid oxide fuel cells, Int. J. Hydrogen Energy. 42 (2017) 5306–5314. doi:10.1016/j.ijhydene.2017.01.065.
Citations: 16
Cited by: [1][3][7][19][11][20][21][22][12][23][13][14][24][15][17][25]

M. Fakouri Hasanabadi, M.A. Faghihi-Sani, A.H. Kokabi, J. Malzbender, The analysis of torsional shear strength test of sealants for solid oxide fuel cells, Ceram. Int. 43 (2017) 12546–12550. doi:10.1016/j.ceramint.2017.06.128.

Citations: 15
Cited by: [3][26][27][7][28][29][21][30][12][23][13][31][15][32][33]

M. Fakouri Hasanabadi, Investigation of mechanical properties of glass-ceramic sealant for solid oxide fuel/electrolysis cells, Sharif University of Technology, Tehran, Iran, 2018. doi:10.13140/RG.2.2.15805.72161/3.
Citations: 4
Cited by: [21][23][13][15]

M. Fakouri Hasanabadi, M.A. Faghihi-Sani, A.H. Kokabi, S.M. Groß-Barsnick, J. Malzbender, Room- and high-temperature flexural strength of a stable solid oxide fuel/electrolysis cell sealing material, Ceram. Int. 45 (2019) 733–739. doi:10.1016/j.ceramint.2018.09.236.
Citations: 18
Cited by: [34][27][7][35][29][36][21][30][37][12][23][38][39][13][15][32][40][41]

M. Fakouri Hasanabadi, A.H. Kokabi, M.A. Faghihi-Sani, S.M. Groß-Barsnick, J. Malzbender, Room- and high-temperature torsional shear strength of solid oxide fuel/electrolysis cell sealing material, Ceram. Int. 45 (2019) 2219–2225. doi:10.1016/j.ceramint.2018.10.134.
Citations: 12
Cited by: [27][29][21][30][12][23][13][31][15][42][17][40]

S.K. Sadrnezhaad, A. Shehab, A. Mahmoud, M.J. Torkamany, A.H. Kokabi, M. Fakouri Hasanabadi, Pulsed Nd: YAG Laser Dissimilar Welding of Ti/Al3105 Alloys, Sci. Iran. (2019). doi:10.24200/sci.2019.52217.2600.

Citations: 3
Cited by: [43][44][45]

A.A. Shehab, S.K. Sadrnezhaad, M.J. Torkamany, M. Fakouri Hasanabadi, M. Alali, A.K. Mahmoud, M.H. Abass, A.H. Kokabi, Ring-like laser spot welding of Ti grade2 to AAl3105-O using AlSiMg filler metal, Optik (Stuttg). 206 (2020) 163630. doi:10.1016/j.ijleo.2019.163630.

Citations: 8
Cited by: [44][46][47][48][49][50][51][45]

M. Fakouri Hasanabadi, J. Malzbender, S.M. Groß-Barsnick, H. Abdoli, A.H. Kokabi, M.A. Faghihi-Sani, Finite element optimization of sample geometry for measuring the torsional shear strength of glass/metal joints, Ceram. Int. 46 (2020) 4857–4863. doi:10.1016/j.ceramint.2019.10.221.
Citations: 5
Cited by: [12][23][13][31][15]

H. Mousa Mirabad, A. Nemati, M.A. Faghihi-Sani, M. Fakouri Hasanabadi, H. Abdoli, Effect of YSZ sol-gel coating on interaction of Crofer22 APU with sealing glass for solid oxide fuel/electrolysis cell, J. Alloys Compd. 847 (2020) 156496. https://doi.org/10.1016/j.jallcom.2020.156496.

Citations: 8
Cited by: [23][31][17][52][53][54][55][56]

M. Fakouri Hasanabadi, J. Malzbender, S.M. Groß-Barsnick, H. Abdoli, A.H. Kokabi, M.A. Faghihi-Sani, Micro-scale evolution of mechanical properties of glass-ceramic sealant for solid oxide fuel/electrolysis cells, Ceram. Int. 47 (2021) 3884–3891. https://doi.org/10.1016/j.ceramint.2020.09.250.

Citations: 4
Cited by: [13][31][15][57]

A. A. Shaik, M. Fakouri Hasanabadi, and V. K. Arulvizhi, “Joining of ceramic to metal by friction welding process: a review,” Proceedings of the Institution of Mechanical Engineers, Part L: Journal of Materials: Design and Applications, 2021.

Citations: 1
Cited by: [56]

M. Fakouri Hasanabadi, A. H. Kokabi, M. A. Faghihi‐Sani, H. Abdoli, J. Malzbender, and S. Gross‐Barsnick, “Advanced analysis of flexural test results of sealant for solid oxide cells,” Int. J. Appl. Ceram. Technol., p. ijac.13842, Jul. 2021, doi: 10.1111/ijac.13842.
Citations: 0
Cited by:

Citations:

[1] M. Fakouri Hasanabadi, M.A. Faghihi-Sani, A.H. Kokabi, J. Malzbender, The analysis of torsional shear strength test of sealants for solid oxide fuel cells, Ceram. Int. 43 (2017) 12546–12550. https://doi.org/10.1016/j.ceramint.2017.06.128.

[2] M. Fakouri Hasanabadi, A.H. Kokabi, A. Nemati, S. Zinatlou Ajabshir, Interactions near the triple-phase boundaries metal/glass/air in planar solid oxide fuel cells, Int. J. Hydrogen Energy. 42 (2017) 5306–5314. https://doi.org/10.1016/j.ijhydene.2017.01.065.

[3] M. Fakouri Hasanabadi, M.A. Faghihi-Sani, A.H. Kokabi, S.M. Groß-Barsnick, J. Malzbender, Room- and high-temperature flexural strength of a stable solid oxide fuel/electrolysis cell sealing material, Ceram. Int. 45 (2019) 733–739. https://doi.org/10.1016/j.ceramint.2018.09.236.

[4] Q. Zhang, K. Chen, D. Tang, T. Zhang, S.P. Jiang, Effects of Nb 2 O 5 and Gd 2 O 3 doping on boron volatility and activity between glass seals and lanthanum-containing cathode, J. Eur. Ceram. Soc. 37 (2017) 1547–1555. https://doi.org/10.1016/j.jeurceramsoc.2016.12.007.

[5] C. Thieme, M. Schlesier, E. Oji Dike, C. Rüssel, Variable thermal expansion of glass-ceramics containing Ba1−xSrxZn2Si2O7, Sci. Rep. 7 (2017) 3344. https://doi.org/10.1038/s41598-017-03132-x.

[6] H. Khachatryan, S.H. Baek, S.N. Lee, H.K. Kim, M. Kim, K.B. Kim, Metal to glass sealing using glass powder: Ion induced crystallization of glass, Mater. Chem. Phys. 226 (2019) 331–337. https://doi.org/10.1016/j.matchemphys.2019.01.037.

[7] M. Fakouri Hasanabadi, A.H. Kokabi, M.A. Faghihi-Sani, S.M. Groß-Barsnick, J. Malzbender, Room- and high-temperature torsional shear strength of solid oxide fuel/electrolysis cell sealing material, Ceram. Int. 45 (2019) 2219–2225. https://doi.org/10.1016/j.ceramint.2018.10.134.

[8] W. Hao, F. Li, Y. Ma, W. Zhang, X. Zhou, L. Shi, Nano-layered-structure interface between Sn-Ti alloy and quartz glass for hermetic seals, Mater. Lett. 236 (2019) 506–509. https://doi.org/10.1016/j.matlet.2018.10.152.

[9] Y.M. Martínez-Triana, R. Whelan, M.G. Finn, D.D. Díaz, Glass-Metal Adhesive Polymers from Copper(I)-Catalyzed Azide-Alkyne Cycloaddition, Macromol. Chem. Phys. 201600579 (2017) 1600579. https://doi.org/10.1002/macp.201600579.

[10] X. Yu, W. Han, S. Wang, K. Song, Y. Fang, Interaction mechanism between Sm–Co magnets and glass coatings doped with mixed adherent oxides, Ceram. Int. 45 (2019) 18291–18297. https://doi.org/10.1016/j.ceramint.2019.06.041.

[11] M. Fakouri Hasanabadi, Investigation of mechanical properties of glass-ceramic sealant for solid oxide fuel/electrolysis cells, Sharif University of Technology, Tehran, Iran, 2018. https://doi.org/10.13140/RG.2.2.15805.72161/3.

[12] H. Mousa Mirabad, A. Nemati, M.A. Faghihi-Sani, M. Fakouri Hasanabadi, H. Abdoli, Effect of YSZ sol-gel coating on interaction of Crofer22 APU with sealing glass for solid oxide fuel/electrolysis cell, J. Alloys Compd. 847 (2020) 156496. https://doi.org/10.1016/j.jallcom.2020.156496.

[13] M. Fakouri Hasanabadi, A.H. Kokabi, M.A. Faghihi-Sani, H. Abdoli, J. Malzbender, S.M. Groß-Barsnick, The analysis of flexural test results of sealant for solid oxide cells, in: 5th Conf. Hydrog. Fuel Cells, Tehran, Iran, 2021.

[14] H.A. Ateş, Katı oksit yakıt pillerinde akım toplayıcıya yapılan ön işlemlerin cam-seramik contaların arayüzey özelliklerine etkisi, SAKARYA ÜNİVERSİTESİ, 2019.

[15] M. Fakouri Hasanabadi, A.H. Kokabi, M.A. Faghihi‐Sani, H. Abdoli, J. Malzbender, S. Gross‐Barsnick, Advanced analysis of flexural test results of sealant for solid oxide cells, Int. J. Appl. Ceram. Technol. 18 (2021) 2091–2098. https://doi.org/10.1111/ijac.13842.

[16] V.K. Verma, K.B. Rana, B. Tripathi, Research advancements and challenges in the design and fabrication of glass to metal seals for solar receiver tube applications, Int. J. Environ. Sustain. Dev. 20 (2021) 381. https://doi.org/10.1504/IJESD.2021.116861.

[17] K. Singh, T. Walia, Review on silicate and borosilicate‐based glass sealants and their interaction with components of solid oxide fuel cell, Int. J. Energy Res. (2021) er.7161. https://doi.org/10.1002/er.7161.

[18] X. Qin, A. Shen, Y. Guo, Z. Lü, Interlayer Bonding Performance of Fiber Asphalt Chip Seal under Different Temperatures and Hydrodynamic Pressures, Jianzhu Cailiao Xuebao/Journal Build. Mater. 20 (2017) 604–610. https://doi.org/10.3969/j.issn.1007-9629.2017.04.019.

[19] B. Timurkutluk, T. Altan, S. Celik, C. Timurkutluk, Y. Palacı, Glass fiber reinforced sealants for solid oxide fuel cells, Int. J. Hydrogen Energy. 44 (2019) 18308–18318. https://doi.org/10.1016/j.ijhydene.2019.05.116.

[20] I. Sreedhar, B. Agarwal, P. Goyal, A. Agarwal, An overview of degradation in solid oxide fuel cells-potential clean power sources, J. Solid State Electrochem. 24 (2020) 1239–1270. https://doi.org/10.1007/s10008-020-04584-4.

[21] M. Fakouri Hasanabadi, J. Malzbender, S.M. Groß-Barsnick, H. Abdoli, A.H. Kokabi, M.A. Faghihi-Sani, Finite element optimization of sample geometry for measuring the torsional shear strength of glass/metal joints, Ceram. Int. 46 (2020) 4857–4863. https://doi.org/10.1016/j.ceramint.2019.10.221.

[22] Welerson de Jesus Lima, Anodos eletrocatalíticos para reforma interna de etanol em pilhas a combustível de óxido sólido, Universidade Federal de Minas Gerais, 2019.

[23] M. Fakouri Hasanabadi, J. Malzbender, S.M. Groß-Barsnick, H. Abdoli, A.H. Kokabi, M.A. Faghihi-Sani, Micro-scale evolution of mechanical properties of glass-ceramic sealant for solid oxide fuel/electrolysis cells, Ceram. Int. 47 (2021) 3884–3891. https://doi.org/10.1016/j.ceramint.2020.09.250.

[24] C.-L. Lin, J.-L. Lee, S.-M. Kuo, M.-Y. Li, L. Gan, H. Murakami, S. Mitani, S. Gorsse, A.-C. Yeh, Investigation on the thermal expansion behavior of FeCoNi and Fe30Co30Ni30Cr10-xMnx high entropy alloys, Mater. Chem. Phys. (2021) 124907. https://doi.org/10.1016/j.matchemphys.2021.124907.

[25] L.Q. Le, Protonic-ceramic fuel cells and electrolyzers: Scale-up, degradation and high-pressure operation, Colorado School of Mines, 2021. https://hdl.handle.net/11124/176441.

[26] B. Ghorbani, K. Vijayaraghavan, A review study on software-based modeling of hydrogen-fueled solid oxide fuel cells, Int. J. Hydrogen Energy. 44 (2019) 13700–13727. https://doi.org/10.1016/j.ijhydene.2019.03.217.

[27] H. Javed, A. Sabato, I. Dlouhy, M. Halasova, E. Bernardo, M. Salvo, K. Herbrig, C. Walter, F. Smeacetto, Shear Performance at Room and High Temperatures of Glass–Ceramic Sealants for Solid Oxide Electrolysis Cell Technology, Materials (Basel). 12 (2019) 298. https://doi.org/10.3390/ma12020298.

[28] K. Uma, S. Chong, S.C. Mohan, K. Jothivenkatachalam, T.C.-K. Yang, J. Lin, Multi-functional RGO-supported α-Fe2O3 nanocomposites for high-performance pseudocapacitors and visible light–driven photocatalytic applications, Ionics (Kiel). 26 (2020) 3491–3500. https://doi.org/10.1007/s11581-019-03400-y.

[29] M. Ferraris, S. De la Pierre, A.G. Sabato, F. Smeacetto, H. Javed, C. Walter, J. Malzbender, Torsional shear strength behavior of advanced glass-ceramic sealants for SOFC/SOEC applications, J. Eur. Ceram. Soc. 40 (2020) 4067–4075. https://doi.org/10.1016/j.jeurceramsoc.2020.04.034.

[30] S.-M. Gross-Barsnick, Interaction of glass-ceramic sealants with solid oxide fuel cell components: thermo-mechanical analysis, in: Intermed. Temp. Solid Oxide Fuel Cells, Elsevier, 2020: pp. 411–426. https://doi.org/10.1016/B978-0-12-817445-6.00012-0.

[31] V.H. Rangel-Hernandez, Q. Fang, J. Malzbender, M.G.R. Sause, C. Babelot, S.M. Gross-Barsnick, L. Blum, An acoustic emission analysis of glass-ceramic sealants for solid oxide fuel and electrolysis cells exposed to torsional tests: Room and high-temperature experiments, Int. J. Hydrogen Energy. 46 (2021) 14724–14734. https://doi.org/10.1016/j.ijhydene.2021.01.232.

[32] A.G. Sabato, H. Javed, M. Salvo, A. Chrysanthou, F. Smeacetto, Glass–Ceramic Sealants for Solid Oxide Cells Research at Politecnico di Torino: An Overview on Design, Sinter-Crystallization, Integration and Interfacial Issues, in: F. Baino, M. Tomalino, D. Tulyaganov (Eds.), Ceram. Glas. Glas., Springer International Publishing, Cham, 2021: pp. 203–227. https://doi.org/10.1007/978-3-030-85776-9_6.

[33] B. Ghorbani, Modelling and Diagnosis of Solid Oxide Fuel Cell (SOFC), Simon Fraser University, Burnaby, Canada, 2021.

[34] M.Y. Akram, V. Casalegno, M. Ferraris, G. Puchas, W. Krenkel, S. Roszeitis, Joining and mechanical testing of oxide/oxide (Nextel ^TM610/alumina-zirconia) ceramic composites, J. Eur. Ceram. Soc. 39 (2019) 2510–2517. https://doi.org/10.1016/j.jeurceramsoc.2019.02.020.

[35] H. Javed, A.G. Sabato, M. Mansourkiaei, D. Ferrero, M. Santarelli, K. Herbrig, C. Walter, F. Smeacetto, Glass-Ceramic Sealants for SOEC: Thermal Characterization and Electrical Resistivity in Dual Atmosphere, Energies. 13 (2020) 3682. https://doi.org/10.3390/en13143682.

[36] S. Dittrich, E. Reitz, K.G. Schell, E.C. Bucharsky, M.J. Hoffmann, Development and characterization of inks for screen printing of glass solders for SOFCs, Int. J. Appl. Ceram. Technol. 17 (2020) 1304–1313. https://doi.org/10.1111/ijac.13461.

[37] C. Lenser, D. Udomsilp, N.H. Menzler, P. Holtappels, T. Fujisaki, L. Kwati, H. Matsumoto, A.G. Sabato, F. Smeacetto, A. Chrysanthou, S. Molin, Solid oxide fuel and electrolysis cells, in: Adv. Ceram. Energy Convers. Storage, Elsevier, 2020: pp. 387–547. https://doi.org/10.1016/B978-0-08-102726-4.00009-0.

[38] A. Krammer, A. Medved, M. Peham, P. Wolf-Zöllner, K. Salbrechter, M. Lehner, Dual Pressure Level Methanation of Co‐SOEC Syngas, Energy Technol. 51 (2020) ente.202000746. https://doi.org/10.1002/ente.202000746.

[39] H. Javed, K. Herbrig, A.G. Sabato, D. Ferrero, M. Santarelli, C. Walter, F. Smeacetto, Electrical characterization of glass-ceramic sealant-metallic interconnect joined samples under solid oxide electrolysis cell conditions; influence on the microstructure and composition at the different polarized interfaces, Ceram. Int. (2020). https://doi.org/10.1016/j.ceramint.2020.11.176.

[40] F. Smeacetto, A. Chrysanthou, A.G. Sabato, H. Javed, S.D. la Pierre, M. Salvo, M. Ferraris, Glass to metal seals for solid oxide cells at the Politecnico di Torino, an overview, Int. J. Appl. Ceram. Technol. (2021). https://doi.org/10.1111/ijac.13949.

[41] R.G. Singh, K. Li, K.M. Lyons, J.N. Waddell, Effect of Two Brands of Glaze Material on the Flexural Strength and Probability of Failure of High Translucent Monolithic Zirconia, Materials (Basel). 14 (2021) 7022. https://doi.org/10.3390/ma14227022.

[42] S. Gross-Barsnick, J. Malzbender, Q. Fang, Repair Joining of Glass-Ceramic Sealants for SOC Stacks, ECS Trans. 103 (2021) 1859–1865. https://doi.org/10.1149/10301.1859ecst.

[43] A.A. Shehab, S.K. Sadrnezhaad, M.J. Torkamany, M. Fakouri Hasanabadi, M. Alali, A.K. Mahmoud, M.H. Abass, A.H. Kokabi, Ring-like laser spot welding of Ti grade2 to AAl3105-O using AlSiMg filler metal, Optik (Stuttg). 206 (2020) 163630. https://doi.org/10.1016/j.ijleo.2019.163630.

[44] A.A. Shehab, S.A. Nawi, A.A. Al-Rubaiy, Z. Hammoudi, S.A. Hafedh, M.H. Abass, M.S. Alali, S.D. Ali, CO2 laser spot welding of thin sheets AISI 321 austenitic stainless steel, Arch. Mater. Sci. Eng. 2 (2020) 68–77. https://doi.org/10.5604/01.3001.0014.6974.

[45] A.A. Shehab, S.K. Sadrnezhaad, M. Alali, M. Fakouri Hasanabadi, M.J. Torkamany, M.H. Abass, A.K. Mahmoud, A.H. Kokabi, Laser Welding of Titanium Grade 2 and Aluminium AA 3105-O Using a New AlScZr Filler Metal, Lasers Manuf. Mater. Process. (2021).

[46] M.H. Abass, M.S. Alali, W.S. Abbas, A.A. Shehab, Study of solidification behaviour and mechanical properties of arc stud welded AISI 316L stainless steel, J. Achiev. Mater. Manuf. Eng. 1 (2019) 5–14. https://doi.org/10.5604/01.3001.0013.7944.

[47] A. Mosavi, A. Soleimani, A. Karimi, M. Akbari, A. Karimipour, A. Karimipour, Investigating the effect of process parameters on the mechanical properties and temperature distribution in fiber laser welding of AISI304 and AISI 420 sheet using response surface methodology, Infrared Phys. Technol. 111 (2020) 103478. https://doi.org/10.1016/j.infrared.2020.103478.

[48] Z. De-yu, X. Yu-feng, T. Hai-hao, Z. Xue, Q. Guo-zheng, A review of chemical elements in welding and additive of titanium aluminum dissimilar alloy, Trans. Mater. Heat Treat. (2021) 11–21. https://caod.oriprobe.com/articles/61439538/A_review_of_chemical_elements_in_welding_and_addit.htm.

[49] L. Ding, Q. Lu, S. Liu, R. Xu, X. Yan, X. Xu, M. Lu, Y. Chen, Quality inspection of micro solder joints in laser spot welding by laser ultrasonic method, Ultrasonics. (2021) 106567. https://doi.org/10.1016/j.ultras.2021.106567.

[50] M. Rafi, H. Sabet, V.A. Mehrizi, Effect of Laser Spot Welding Variables on Microstructure and Mechanical Properties of the Ti-6AL-4V to AISI304 Dissimilar Joint, J. Weld. Sci. Technol. Iran IWNT. 7 (2021) 29–39. https://jwsti.iut.ac.ir/article-1-361-fa.html.

[51] W. Lu, Y. Zhang, D. Yu, D. Sun, H. Li, Research progress on control strategy of intermetallic compounds in welding process of heterogeneous materials, Steel Res. Int. (2021). https://doi.org/10.1002/srin.202100427.

[52] M.K. Mohammadzad, G. Pircheraghi, H. Sharifi, Fabrication, characterization, and electrochemical performance of the HDPE/sepiolite nanocomposite as a novel separator for Li-ion batteries, Express Polym. Lett. 15 (2021) 1063–1080. https://doi.org/10.3144/expresspolymlett.2021.86.

[53] L. Li, Y.-Z. Liang, S.-M. Chen, P. Shen, Ultrafast and robust joining of 3YSZ and GH3128 superalloy using Cu interlayer under an electric field, J. Alloys Compd. (2021) 161893. https://doi.org/10.1016/j.jallcom.2021.161893.

[54] M.R.A.H. Mousa, M.R. Behjat, G.K. Kakaei, Synergistic Effects of MWCNTs and High ‑ Pressure Torsion ‑ Induced Grain Refinement on Microhardness , Tribological Properties , and Corrosion Behavior of Cu and Cu / MWCNT Nanocomposites, Met. Mater. Int. (2021). https://doi.org/10.1007/s12540-021-01112-5.

[55] Y. Huang, K. Huang, S. Zhou, C. Lin, X. Wu, M. Gao, C. Zhao, C. Fang, Influence of incongruent dissolution-precipitation on 8YSZ ceramics during cold sintering process, J. Eur. Ceram. Soc. (2021) 1–8. https://doi.org/10.1016/j.jeurceramsoc.2021.12.072.

[56] Y. Dong, X. Sun, Z. Liu, G. Qiu, X. Zhang, Y. Han, J. Ding, X. Wang, A limiting current oxygen sensor with (CuO)0.1(8YSZ)0.9 dense diffusion barrier, Phys. B Condens. Matter. 630 (2022) 413701. https://doi.org/10.1016/j.physb.2022.413701.

[57] S.-F. Wang, Y.-F. Hsu, Y.-L. Liao, Y.-J. Yang, P. Jasinski, Physical and sealing properties of BaO–Al2O3–SiO2–CaO–V2O5 glasses for solid oxide fuel cell applications, Int. J. Hydrogen Energy. 60 (2022) 499–508. https://doi.org/10.1016/j.ijhydene.2022.01.094.

[58] O. Kamynina, S. Vadchenko, N. Shkodich, I. Kovalev, Ta/Ti/Ni/Ceramic Multilayered Composites by Combustion Synthesis: Microstructure and Mechanical Properties, Metals (Basel). 12 (2021) 38. https://doi.org/10.3390/met12010038.